I can't select the 120p/100M setting to record video and it shows only 100p/100M
IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.
When attempting to select the highest frame and bit rate combination of the camera (120p/100M), you may only see the 100p/100M listed as the highest setting. If your camera is capable of 120p/100M, then you will need the make sure the TV system setting is NTSC. The 120p frame rate is not available for the PAL setting.
Set the TV system setting to NTSC
- Select MENU
- Navigate to and select Settings
- Highlight NTSC/PAL Selector
- Set to NTSC
Wait for the camera to reboot and go to the Record Setting section, where you can change the frame rate/bit rate setting to 120p/100M.
- The file format must be set to XAVC S HD
- To record using another TV system, re-format the memory card or use another.
- The 120p/100p frame rates can't be selected for the Intelligent Auto and Sceen Selection modes.
Product Repair
Repair information and service assistance
Community
Here you can ask questions and connect with other Sony users
Parts & Accessories
Product information and sales assistance
Register a Product
Keep track of all your products in one location
Contact Support
Product support & customer relations
Support by Sony (Mobile App)
Get Support Content on the Go!
